Audio Hungary QUALITON A20i
- BrandsAudio Hungary
- Product Code: Audio Hungary QUALITON A20i
- Availability: 2
Stereo, Class-A integrated amplifier featuring push-pull circuitry.
The rated power output of the appliance is 20 W at the most, each side.
The outputs at the rear panel can be connected to 8 Ω nominal impedance speakers. The design of the output transformers of the power amp enable to connect the amp with 4 Ω nominal impedance speakers as well. This entails a slight deviation from the parameters indicated in the technical data sheet.
At the front panel, the volume control potentiometer and the input selector rotary switch are connected to the same shaft. Indicators informing about the actual state of the amp are located at the front panel too. It can be monitored whether the appliance is ready for operation (if so, the LED next to the volume control turns from red to white light).
The user is also informed about the actual position of the input selector unit. The amp is made of solid, 1.5 mm thick, polished stainless steel sheet.
Warranty: 2 years
- Technical parameters
Name Value Rated output power 2 x 20 W, stereo Total harmonic distortion < 0.3% (f = 1 kHz, rated output power) Frequency response 25 Hz - 100 kHz (-3 dB, rated output power) Input sensitivity 230 mV, unbalanced input Number of input ports 3 unbalanced input per channel Number of output ports 1 output terminal pair per channel Gain +34.8 dB Input impedance 10 kOhm Nominal load impedance 8 Ohm Output polarity non-inverting Signal-to-noise ratio > 90 dB; output noise less, than 1 mV Power requirements 150 W Tubes required 4 x 5881; 2 x E88CC/6922; 2 x Tungsram ECC83 Weight 16 kg Dimensions 27 x 18 x 30 cm
Please when order use coupon :Tubemaniac for 15% discount
- Worldwide shipment service where the Distributor or Dealer does not exist
- Free ship cost in Europe for order over 500€ (except speakers, we offer 50% of ship cost)
- Free ship cost Worldwide for order over 2000€ (except speakers, we offer 50% of ship cost )